Knowing how to jump-start a car is important for every driver, as it can mean the difference between driving off again in minutes or waiting on the side of the road for help. As your INFINITI dealership, we want to tell you the simple steps to get that working again. In the example below, your INFINITI will be used to jump-start another vehicle with a dead battery.
Advice From Your INFINITI Dealership: 5 Easy Steps To Jump-Start a Car
Park Close
Before you park, check the location of the battery in the other vehicle. It's usually in the front, but some cars have the engine and the battery in the trunk. Once you've found the other battery, park your INFINITI so your battery is as close as possible to the other vehicle's battery. This makes it easier to connect the cables to the two batteries.
About the Cables
Jumper cables have a red cable and a black cable with metal clamps on the ends. The red cable is positive and the black cable is negative. When you're ready to make the first connection, make sure that the red and black cables don't touch. These cables must be connected in a specific order, as an incorrect connection could damage your battery or even start a fire.
Connect the Cables
Attach one end of the red cable to the positive terminal on the dead battery. The terminals are usually marked with + and - signs. The positive terminal might also be covered with a red plastic cover that can be easily removed. Once the red cable is secure, connect the other end of the cable to the positive terminal on your battery.
Next, take one end of the black cable and connect it to the negative terminal on your battery. For the final step, connect the other end of the black cable to any unpolished piece of metal in the other vehicle's engine. Check that all the clamps are secure.
Give Some Juice
Return to your car and start the engine. Allow it to idle for several minutes, then go to the other car and try to start its engine.
If the engine starts, you can disconnect the cables. If the engine doesn't start, allow your engine to idle for approximately 10 minutes and try again.
Disconnect the Cables
Disconnect the cables in the reverse order to how you originally connected them. Congratulations, you've recharged a battery.
If you'd like more information about jump-starting, visit us today at Edison INFINITI in Edison, NJ.